Where innovation meets flexibility – VORTEX is a groundbreaking air-cooled condenser that allows you to operate anywhere without the constraints of cooling water, saving hundreds of litres of water per run.  The VORTEX Air Cooled condenser utilises forced air to dissipate heat from vapour and liquid and can be used in place of a water-cooled condenser as well as part of a still configuration for stills with 2" tri-clamp compatibility.

It integrates seamlessly into any 2” tri-clamp setup or with CREATE+ components. A simple turn of a dial controls fan speed and cooling temperatures instantly and puts precision in your hands at every stage. 

INSTRUCTIONS: 
This product can be used in place of a water-cooled condenser as well as part of a still configuration for stills with 2” tri-clamp compatibility.

As vapour or liquid move through the two internal tubes of the condenser, the aluminum 
fins absorb the heat, which is then dispersed \by the three integrated air fans. The speed of the fans can be increased or decreased with the control dial to control the heat dissipation 
rate, like adjusting the water flow of traditional water-cooled condensers.

CLEANING AFTER USE: To clean, you can use a household vacuum cleaner to remove dust that may collect in the fan grill and the finned tubes over time.  To clean inside the product pathway, conduct a distillation run of equal parts white vinegar and drinking water.

CAUTION: Metal fins can have sharp edges.  Use care when handling, assembling, cleaning, or storing this unit, and avoid running fingers along the fin surface.

DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities.

1. Choose Your Still Setup

Decide how you're distilling - Reflux or Alembic - and replace your water-cooled condenser or dephlegmator with the VORTEX Air Cooled Condenser.

2. Attach to Your Boiler

Connect your reflux column or alembic setup to your lid or alembic dome, and then on to your boiler.

3. Power On

Turn on your boiler and heat your wash. Just before you hit your target temperature, turn on the VORTEX - no cooling water, no fiddling with water flow.

4. Distill

Run your distillation as normal - the VORTEX handles the cooling and condensing.