REGULATOR - INLINE 60psi

Inline Regulator - 60 psi

Duotight Inline Regulator With Gauge - 8 mm (5/16") (0-60 PSI)

This Inline Regulator with Gauge is suitable for gas or liquid. It is constructed out of non corrosive acetyl, nitrile, and stainless components. At the base of the regulator are two mounting points allowing it to be securely attached to wherever you desire.

It features an integrated fully interchangeable gauge that displays pressure between 0 - 60 PSI. You can use it to lower the Co2 pressure going into a keg, or use it to reduce the main water pressure to anywhere between 0-150 PSI.

The intended use for this regulator is to allow for the serving of different beers at different gas pressures. Traditionally this is done by utilizing a Primary and Secondary regulator where you would set different pressures. This compact device is a far cheaper solution that still allows you to set different pressures for your various different beers.

This is done by setting the Primary regulator to the highest pressure desired for your system. From there you run the gas line into a manifold, then install one of these inline regulators after each manifold where you want to decrease pressure. Once installed you can manually adjust the flow with the adjustment knob.

Duotight fittings are designed to work by simply pushing in the compatible tubing.

Meant to be used with 8 mm (5/16") OD Beverage Hose & Polyethylene Tubing.