KEGERATOR X - 2 TAP SUPER SLIM GRANDE

Kegland Series X Kegerator Grande with two Stainless Steel Nukataps

Grande signifies a complete bundle. We supply the Kegerator equipment, you supply the beverage.

This new Series X Kegerator has several major advancements over the older Series 4 model.

• 10% more power efficient
• 15% faster cooling and better cooling in hotter climates
• Thicker walls for improved insulation
• Fits up to 4 x 19 Litre Corney Kegs

The Kegland Series X Kegerator Grande includes

• Keg Master Series X Kegerator Fridge with Font Fan Switch
• Honey Comb Reinforced Black Plastic Wrap Round Drip Tray
• Reinforced four point anchored castor wheels with bolts. (2 Locking, 2 Non-Lockable)
• Co2 Cylinder Holder (designed to suit 2.6 kg gas cylinder)
• Stainless Steel Guard Rail
• Font Plug

Kegerator equipment includes

• 1 x Double Tap Brushed Stainless Steel Super Slim Tower (Font).
• 2 x Stainless Steel Short Shanks
• 2 x Stainless Steel Nukataps
• 2 x Stainless Steel Self-Closing Springs
• 2 x Black Plastic Tap Handles
• Fully installed 4 mm ID x 8 mm OD Beer Line
• 2 Meter of 5 mm ID x 8 mm OD Gas Line
• DT Push in Tee Piece
• 4 x Metric M5 stainless screws to secure the font to the fridge.
• 4 x Duotight FFL Fittings
• 2 x Duotight Beer Disconnects
• 1 x 2.6kg Co2 Full Gas Bottle
• Gas Regulator
• 2 x Duotight Gas Disconnects
• 2 x 19 litre New Cornelius Kegs
• 250gm Keg and Line Cleaner

External Dimensions

• 600 mm Wide
• 665 mm Deep
• 840 mm Height
• 890 mm Height of the fridge, including castor wheels but excluding the height of guard rail, drip tray or tower)
• 240 volt - 85 watts

Internal Dimensions

• Depth - 425mm
• Height - 725mm
• Width - 550mm

• When it comes to maintaining the best quality beer for your customers, the routine cleaning of your draft lines is an essential practice. Over time, a buildup of bacteria, mould, yeast and sediment (beer stone) can accumulate in your lines, affecting your beer’s flavour profile and causing foaming.

• Remove your draft line from the keg and make sure any beer remaining in the line is removed
• Mix a cleaning solution of P.B.W using 1 to 2 ounces per gallon of hot water to put through the draft line under pressure. You can use a line cleaning kit available in store.
• Run the solution through your draft line, letting it soak for up to 30 min. to remove any buildup
• Run clean water through the draft line, under pressure, to flush out the cleaner
• Tap the next keg and let beer run through the line, checking for any issues

Kegerator Normal Operating Sounds.

• These kegerators have been manufactured with the new r600a refrigerant gas used on many appliances.
• Kegland use this particular type of gas as it's the most environmentally friendly gas and it's also more electrically efficient.
• This type of gas does make some unusual sounds.