- Sku: 41358
- Barcode:
IOSTAR - 946ml - 32 oz
$29.95 AUD
Tax included.
Shipping calculated at checkout.
In stock!
Description
IOStar Iodine Sterilizer - 946ml
- IOStar is an iodine based no-rinse sanitizer.
- 1-2 minute contact time when used in the concentration of 30 ml per 18 litres.
- It will slightly stain vinyl tubing and some plastic parts over time but will not affect the functionality of the tubing at all.
Benefits
-
- Easy to use
- Economical dilution ratio
- Controls water hardness
- Self-indicating
- Easy to use
- Economical dilution ratio
- Controls water hardness
- Self-indicating
Description
- IO-STAR is formulated for use by the bottling, food processing, and milk industry.
- When used continuously as a sanitizing spray on walls and equipment it will reduce or eliminate odors throughout the processing area.
- IO-STAR is effective against e coli and s s typhosa as well as most mold and yeast.
Properties
-
- Appearance: Dark blue to black
- Odor: Typical Iodine
- Foam: Moderate
General Use Directions
- Fresh sanitizing solution should be prepared daily or more often if the solution becomes diluted or soiled.
Dilution Table
-
- 30 ml IO-STAR to 37.8 Litres water = 12.5 ppm
- 30 ml IO-STAR to 18.9 Litres water = 25 ppm
- 60 ml IO-STAR to 18.9 Litres water = 50 ppm
Cip Sanitizing
- Use 25 ppm IO-STAR to flood lines and circulate in tanks.
- After 5 minutes contact, drain off solution.
- Do not rinse.
- Use 12.5 ppm IO-STAR in lines and equipment when a slight sanitizing solution is desired between filling operation.
- After 10 minutes contact, drain off solution.
- A potable water rinse is not required after use.
Equipment Sanitizing
- To pre-cleaned equipment, circulate with cold or lukewarm water with a solution of 1 ounce IO-STAR to 5 US gallons water.
- Rinse with potable water.
- To sanitize, spray or immerse equipment with a fresh solution of 1 ounce IO-STAR to 5 US gallons cold or lukewarm water (provides 25 ppm titratable iodine).
- Allow a one minute contact time. When ready to use, drain sanitizing solution.
Tank and Vat Sanitizing
- Pre-clean with 1 ounce IO-STAR to 5 US gallons water (not hot).
- Rinse with potable water.
- To sanitize, spray or fill vat with 1 ounce IO-STAR to 5 gallons water (provides 25 ppm titratable iodine).
- After 5 minutes, drain off solution.
Safety
- Avoid contact with food.
- Causes moderate eye injury.
- Avoid contact with eyes, skin or clothing.
- Wash thoroughly with soap and water after handling.
- Store this product in a cool dry area.
- Do not allow it to freeze.
IOSTAR - 946ml - 32 oz
$29.95 AUD