55L FERMZILLA TRI-CRONICALCOMPLETE PRESSURE KIT

55 Litre Complete Fermzilla Tri-Conical Fermenter - Gen 3.

• This is a one-click option for those who want to be able to brew under pressure with a 55L Tri-Conical FermZilla.
• Designed as a single batch system that goes perfectly hand in hand with the BrewZilla 65L Gen3.1.1 or Gen4 if you are looking to Brew All Grain or Partial Mash beers.

• This kit now includes a 600mL collection container with a 3 Inch Tri-clover connection that is the gold standard for sanitary design and effortless removal.
• This is a very good starting point for those who are just getting into pressurisable fermenters.
• Pressure fermentation opens up a world of possibilities for the homebrewer wanting to take their beers to the next level.
• If you are kegging then the ability to do a closed pressure transfer straight into a keg is worth the cost of entry!
• If you don't have any spare disconnects or tubing, you might want a jumper transfer line kit.
• This kit has carbonation caps on the collection container either to purge or take samples of yeast from.
• We would also still recommend getting a Co2 gas bottle to be able to transfer to a keg / bottle / can or dispense directly out of the unit. 

What's new the difference between Gen2 and Gen3?

• 1. Moulded 3 inch tri clover ferrule in the body of the FermZilla tank
• 2. 3 inch Tri-Clover Butterfly Valve
• 3. 3 Inch Tri-Clover 600mL Collection Container.

What included:

• 1 x 55L Conical FermZilla Tri-Conical Base Kit (unassembled)
• 2 x Red Carbonation Caps (Use these as Gas posts)
• 2 x Yellow Carbonation Caps (Use these as Liquid Posts)
• 1 x Stainless Steel Float with Silicone Dip Tube and Mesh Filter (You will need to cut this to your desired depth)
• 1 x BlowTie Integrated Spunding Valve Kit

 FREE! 0-15psi Integrated Blow Tie Spunding Valve.

• 1 x Duotight 8mm x Gas Ball Lock Disconnect
• 1 x 8mm Rigid Joiner Tube

• The new FermZilla is a revolution in home brewing allowing home brewers and small micro-breweries a level of control that meets everyone's budget. 
• With the FermZilla you have many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 2.4bar.
• This is an incredible product at an extremely attractive price point in all the different sizes and models.

Please note:

• When using this vessel under pressure, you must perform a water pressure check to ensure your connections are leak proof.
• To do this simply fill your FermZilla up with water, then apply a minimum of 15psi pressure to the vessel.
• Check for leaks around all Cap / Threads.

• Occasionally these units may come with some small indentations / dimples / dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. These fermenters are designed to endure minor deformations such as this.
• This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures.
• All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.

Warnings:

• Please read the instructions thoroughly before use.
• Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET. 
• Do not expose to temperatures exceeding 35°C and pressure ferment past 5psi at these temperatures.

Dimensions:

1073mm High.

388mm Wide.